Omron F3SG-2RE0430P30 User Manual page 260

Appendix
Test Rod
Appearance
To check operation before use, purchase and use the test rod.
Spatter Protection Cover (two pieces per set, common for emitter/receiver)
Appearance
Mirrors (Operating range becomes 12% shorter than the rating)
Appearance
Control Unit
Appearance
F3SG-R
236
User's Manual
Model
F39-TRD14
F39-TRD30
Model
F39-HGA For the F3SG-R of the protective height of 2,000 mm or longer, use
(for F3SG-RA) two Spatter Protection Covers of different lengths.
F39-HGB Please note the following:
(for F3SG-RE) • The operating range of the F3SG-R attached with the Spatter
Protection Cover is 10% shorter than the rating.
• The Spatter Protection Cover extends over the DIP Switch cover
of the F3SG-RA. Be sure to use the Spatter Protection Cover
only after all required settings are made to the DIP Switch.
Material: PC (Transparent cover), ABS (Side wall), Stainless steel
Model
□□□□
F39-MLG Dimension L is the length of mirror part.
□
: Dimension L (mm) Other dimensions: Width 145 mm, Thickness 32 mm
F39-MLG0406 2 sets of cylinder mounting brackets and four screws are included.
F39-MLG0610
F39-MLG0711
F39-MLG0914
F39-MLG1067
F39-MLG1219
F39-MLG1422
F39-MLG1626
F39-MLG1830
F39-MLG2134
Model
G9SA-301 Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Diameter
14 mm dia.
30 mm dia.
Remarks
(Bracket), Aluminum adhesive tape (Fixing Sticker)
Remarks
Output
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• A type of 5 N.O. and 1 N.C.
contacts is also available.
Remarks