The user can make changes to the settings by the Configuration Tool.
Lamp output
Function
Red
Output operation mode
(Priority 1)
Inverted signal output
Output pattern
Orange
Output operation mode
(Priority 2)
Inverted signal output
Output pattern
Green
Output operation mode
(Priority 3)
Inverted signal output
Output pattern
*1. Setting parameters of this function can be saved according to the states where the Muting function
is enabled and disabled, respectively. After changing the Muting function from Enable to Disable or
from Disable to Enable, also check the settings of this function again.
Refer to
Considerations for enabling and disabling Muting function under 2-1. Combination of
Functions for more information.
Refer to 2-12. Muting for more information on settings of the Muting function.
*2. Refer to the table of Information (Output operation mode) assigned to Lamp below.
*3. The Lamp illuminates according to the patterns as shown in the output pattern chart below.
Output pattern chart
ON 1 time
ON 2 times
ON 3 times
Solid-ON
Information (Output operation mode) assigned to Lamp
Information Name
Safety output information
Interlock information
Lockout information
Excess power-on time
information
Excess load switching
frequency information
Stable-state information
Muting information
Override information
Muting/Override information
Factory Default Setting
Muting function *1
Enabled
Safety output information
Enable
Solid-ON
Stable-state information
Enable
ON 1 time
Safety output information
Disable
Solid-ON
1 s
(Auxiliary output is turned ON under the following condition)
When Safety output is in the ON state
Under Interlock state
Under error/ Lockout state
When power-on time exceeds power-on time threshold
When load switching frequency exceeds load switching frequency threshold
When the F3SG-R is unblocked with stable light intensity
Under Muting state
Under Override state
Under either Muting or Override state
System Operation and Functions
Available Parameters
Disabled
Safety output information *2
Enable
Enable/Disable
Solid-ON
Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Stable-state information
*2
Enable
Enable/Disable
ON 1 time
Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Safety output information *2
Disable
Enable/Disable
Solid-ON
Solid-ON/ON 1 time/ON 2
times/ON 3 times *3
Description
E
F3SG-R
99
User's Manual