Omron F3SG-2RE0430P30 User Manual page 259

Laser Alignment Kit
Appearance
Standard Fixed Bracket
Appearance
Standard Adjustable Bracket
Appearance
Top/Bottom Adjustable Bracket
Appearance
Model Application
F39-PTG You can attach this to
F3SG-R. The laser light
assists coarse beam
alignment.
Model Application
F39-LGF Bracket to mount the
F3SG-R.
Side mounting and
backside mounting
possible.
Beam alignment after
mounting not possible.
Model Application
F39-LGA Bracket to mount the
F3SG-R.
Beam alignment after
mounting possible.
Side mounting and
backside mounting
possible.
Model Application
F39-LGTB Bracket to mount the
F3SG-R. Use this bracket
at the top and bottom
positions of the F3SGR.
Beam alignment after
mounting possible. Side
mounting and backside
mounting possible.
F39-LGTB-1 F39-LGTB-1 does not
come with the parts to
mount to a wall surface
(Top/Bottom Bracket (3)
and Screw (1). Please
prepare these parts
according to your device.
Appendix
Remarks
Red semiconductor laser
(wavelength 650 nm, 1 mW max., JIS
Class 2, IEC Class 2, FDA Class II)
Remarks
Number of brackets when purchased as
spare: 2 brackets per set
F39-LGF is included in the F3SG-R
product package.
The number of brackets included depends
on protective height of the F3SG-R.
- Protective height and number of brackets
included:
Less than 1,280 mm: 2 sets
1,280 mm or longer and up to 2,270 mm:
3sets
2,350 mm or longer and up to 2,510 mm:
4 sets
Remarks
2 brackets per set.
Remarks
4 brackets per set.
This bracket is not useable together with
the Standard Fixed Bracket. When it is
necessary to use it with another bracket,
only the combination with the Standard
Adjustable Bracket is possible.
Refer to 4-4-3-3. Mounting with Top/Bottom
Adjustable Brackets (F39-LGTB) for more
information on parts names of this bracket.
User's Manual
E
F3SG-R
235