Switching The Information Display - Olympus V207090SU000 Instruction Manual

Switching the information display

You can switch the information displayed in the monitor during
shooting using the INFO button.
S-AF
ISO-A
200
P
INFO
S-AF
ISO-A
200
P
Level Gauge display
• You can change Custom1 and Custom2 settings. g [G/Info Settings] > [LV-Info]
(P. 166), [ V Info Settings] (P. 173)
• The information shown in movie (n) mode can differ from that displayed in still
photography mode. g Video Menu > [ n Display Settings] (P. 146)
• The information display screens can be switched in either direction by rotating the dial
while pressing the INFO button.
Histogram display
A histogram showing the distribution of
brightness in the image is displayed. The
horizontal axis gives the brightness, the vertical
axis the number of pixels of each brightness
in the image. Areas above the upper limit at
shooting are displayed in red, those below the
lower limit in blue, and those within the spot
metering range in green.
Level gauge display
The orientation of the camera is indicated. The "tilt" direction is indicated on the vertical bar
and the "horizon" direction on the horizontal bar.
• The level gauge is intended as a guide only.
• Calibrate the gauge if you fi nd it is no longer truly plumb or level. g [Level Adjust]
(P. 174)
INFO INFO
S-IS AUTO
L F
4K
30p 30p
1:02:03
0.0 0
250 F5.6
1023
Basic Information
S-IS AUTO
INFO INFO
1:02:03
0.0 0
250 F5.6
1023
(Custom2)
Image Only
S-IS AUTO
S-AF
ISO-A
200
1:02:03
P 250 F5.6 0.0 0
1023
Histogram display
(Custom1)
More
Less
Dark
INFO button
INFO INFO
Bright
EN
2
33