Olympus V207090SU000 Instruction Manual page 150

Sound Recording Options
Adjust settings for recording sound during fi lming. You can also access settings for use
when an external microphone or recorder is connected.
1
Select [Movie R] in n Video Menu and press the Q button.
2
Select [On] and press I.
3
Use FG to select the item and press I.
• Use FG to select the setting and press the Q button.
4
Recording Volume
R Volume Limiter
Wind Noise
Reduction
Recording Rate
R Plug-in Power
PCM Recorder R Link
• Operation sounds of the lens and camera may be recorded in a movie. To prevent it from
recording, reduce the operation sounds by setting [n AF Mode] (P. 80) to [S-AF], [MF],
or [PreMF], or by minimizing the button operations of the camera.
• Sound is not recorded:
with high-speed or slow- or fast-motion movies or when k (diorama) is selected for
picture mode.
• When [Movie R] is set to [Off], O is displayed.
• Audio can only be played on devices that support the option selected for [Recording
Rate].
150 EN
Adjust microphone sensitivity. Choose separate values for the
built-in stereo microphone and external microphones.
[Built-In R]: Adjust the sensitivity of the camera's built-in stereo
microphone.
[MIC R]: Adjust the sensitivity of external microphones connected
to the microphone jack.
Choose the maximum volume at which the camera will record
sound. Use this option to automatically reduce the level of sounds
above a certain volume.
Reduce wind noise during audio recording.
Choose an audio recording format.
[96kHz/24bit]: High-quality audio.
[48kHz/16bit]: Standard-quality audio.
Adjust settings for use with condenser microphones and other
devices that draw power from the camera.
[Off]: For devices that do not require power from the camera
(general-purpose dynamic microphones).
[On]: For devices that require power from the camera (condenser
microphones).
Adjust settings for use with external IC recorders. Record a slate
tone or choose whether camera controls can be used to start and
stop recording when using an Olympus LS-100 IC recorder.
[Camera Rec. Volume]: Choose [Operative] to record sound at the
level selected with the camera, [Inoperative] to record sound at the
level selected with the recorder.
[Slate Tone]: Enable or disable slate tone recording.
[Synchronized R Rec.]: Choose whether audio recording begins
and ends at the same time as movie recording.
(Movie R)