Olympus V207090SU000 Instruction Manual page 111

Role
Display the digital level gauge. The exposure bar display in the
viewfi nder functions as a level gauge. Press the control again to exit.
V Level Disp
This option takes effect when [Style 1] or [Style 2] is selected for
[EVF Style] (P. 197) in G Custom Menu a.
Switch between viewfi nder photography and live view. If [Off] is
u View
selected for [EVF Auto Switch] (P. 173), the display will switch
Selection
between the viewfi nder and the monitor. Press and hold the control to
(display selection)
display [EVF Auto Switch] options.
Enable [S-OVF] (P. 173). Press once to turn OVF simulation on.
Press again to turn it off.
S-OVF (n)
• This role is available for [K Button Function] only.
Enable the AF limiter (P. 163). Press once to enable [AF Limiter].
Press again to disable. Hold the button and rotate the front or rear
AF Limiter
dial to choose from three stored settings.
• This role is available for [K Button Function] only.
Toggle [K AF Mode] > [Preset MF] on or off (P. 80). Press the
control once to enable preset MF and again to restore the previous
focus mode. Alternatively, you can choose the [K AF Mode] by
Preset MF (PreMF)
holding the control and rotating a dial. Focus-mode selection using
custom controls is not available when [mode2] is chosen for [K Fn
Lever Function] (P. 164).
Lens Info Settings Recall previously-saved lens data (P. 196). Recall saved data for the
(sLens) current lens after changing lenses or the like.
Toggle [Image Stabilizer] on or off (P. 86). Press once to select
IS Mode [Off] and again to turn image stabilization on. Hold the control and
rotate the front or rear dial to access [Image Stabilizer] options.
Adjust settings for [Flicker Scan] (P. 148, 194). Press the control
to select [On]. You can adjust shutter speed for best results while
Flicker Scan
viewing banding in the display. Press the control again to display
(P)
shooting information and access other settings. Press and hold the
control to select [Off] for [Flicker Scann].
Adjust fl ash settings (P. 95). Press once to display fl ash options
and again select the highlighted option and exit. Highlight settings
using the front or rear dial or HI on the arrow pad.
Flash Mode (#)
• This function can be assigned to the I and G buttons only. You
• This role is available for [K Button Function] only.
must fi rst set [d Function] to [Direct Function].
Function
2
EN 111