Choosing A Focus Target (Af Target Point) - Olympus V207090SU000 Instruction Manual

s 25-Target Group (5 × 5)
Select a group of 25 targets, arranged in a square. The
camera chooses the target used for focus from within the
selected group.
2
q All Targets (11 × 11)
The camera chooses the target used for focus from all 121
targets.
• The single target mode is automatically applied in movie shooting if the group target mode
is set.
%
• You can adjust AF target settings for [C-AF]. g [K C-AF Center Start] (P. 177) and
[K C-AF Center Priority] (P. 178)
• To enable cluster AF targeting when q (all targets) is
selected and [S-AF], [S-AFb], or [C-AF] is chosen for
[K AF Mode] (P. 80), select [On2] for [AF Area Pointer]
(P. 162). The camera will display AF targets for all areas
that are in focus.
Choosing a Focus Target
The frame showing the location of the focus point is referred to as the "AF target". You
can position the target over your subject.
1
Use FGHI to display the AF target.
2
Use the arrow pad to position the AF target during
AF target selection.
• The size and number of the AF target changes depending on the [Digital Tele-converter]
(P. 130), [Image Aspect] (P. 87), and group target (P. 65) settings.
• Use the [N Custom Settings] (P. 162) in the custom menus to choose the roles of the
dials and FGHI during AF target selection.
66 EN
s
q
(AF Target Point)
M
AF target