Switching The Information Display - Olympus E-M1 Mark III Instruction Manual

Switching the information display

You can switch the information displayed in the monitor during
shooting using the INFO button.
100
ISO-A
200
P
INFO
100
ISO-A
200
P
Level Gauge display
• The items shown in the Custom 1 and Custom 2 displays can be chosen using [G/Info
Settings] > [LV-Info] (P. 227).
• The information shown in movie (n) mode can differ from that displayed in still
photography mode. g n Video Menu > [ n Display Settings] > [ n Info Settings]
(P. 164)
• The information display screens can be switched in either direction by rotating the dial
while pressing the INFO button.
• To choose the items displayed when the shutter button is pressed halfway, highlight
[Image Only] in the [LV-Info] menu and press I.
Histogram display
A histogram showing the distribution of brightness
in the image is displayed. The horizontal axis
gives the brightness, the vertical axis the number
of pixels of each brightness in the image. Areas
above the upper limit at shooting are displayed in
red, those below the lower limit in blue, and those within the spot metering range in green.
You can choose the upper and lower limits. g G Custom Menu R > [Histogram Settings]
(P. 189)
Highlights and Shadows
Highlights and shadows, defi ned according to the upper and lower limits for the
histogram display, are shown in red and blue. You can choose the upper and lower limits.
g G Custom Menu R > [Histogram Settings] (P. 189)
%
INFO INFO
S-IS AUTO S-IS AUTO
YF YF
4K
30p 30p
1:02:03
250 F5.6 0.0
1023
Basic Information
%
S-IS AUTO S-IS AUTO
INFO INFO
1:02:03
250 F5.6 0.0
1023
(Custom2)
Image Only
100
%
S-IS AUTO S-IS AUTO
ISO-A
200
1:02:03
P
250 F5.6 0.0
1023
Histogram display
(Custom1)
More
Less
Dark
INFO button
INFO INFO
Bright
EN
2
39