Olympus V207090SU000 Instruction Manual page 148

Reducing Flicker Under LED Lighting
Banding may occur in movies fi lmed under LED lighting. Use [n Flicker Scan] to
optimize shutter speed while viewing banding in the display.
This option is in [n Mode] (movie exposure modes) [S] and [M].
• The range of available shutter speeds is reduced.
1
Select [S] or [M] for [n Mode] (movie exposure modes).
2 Highlight [n Mode Settings] in the video menu and press the Q button.
3
Highlight [n Flicker Scan] and press I.
4 Highlight [On] using the FG buttons and press the Q button.
4
Press the MENU button repeatedly to exit the
5
menus.
• A P icon is displayed when fl icker scan is
enabled.
6
Choose a shutter speed while viewing the display.
• Choose a shutter speed using the front or rear dial or
the FG buttons.
• Continue adjusting shutter speed until banding is no
longer visible in the display.
• Press the INFO button; the display will change and the
P icon will no longer be displayed. You can adjust
aperture and exposure compensation. Do so using the
front or rear dial or the arrow pad.
• Press the INFO button repeatedly to return to the fl icker
scan display.
7
Begin fi lming when settings are complete.
• Focus peaking, the LV super control panel, and live controls are not available in the fl icker
scan display. To view these items, fi rst press the INFO button to exit the fl icker scan
display.
%
• [n Flicker Scan] can be assigned to a button. You then need only press the button to
enable fl icker scan. g [n Button Function] (P. 107)
148 EN
(n Flicker Scan)
n
250.0
P icon
n
250.0
Shutter speed
P
P