Olympus V207090SU000 Instruction Manual page 169

T Exp/ISO/BULB/p
Option
Exposure Shift
EV Step
ISO Step
ISO-Auto Set
ISO-Auto
K Noise Filter
Noise Reduct.
Adjust correct exposure separately for each metering mode.
• This reduces the number of exposure compensation
options available in the selected direction.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 64).
Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
Select the increments available for choosing ISO sensitivity.
[Upper Limit/Default]: Choose the maximum and default ISO
sensitivity used when [AUTO] is selected for ISO. Select
[Upper Limit] to choose the maximum sensitivity, [Default] to
choose the default sensitivity. The maximum is 6400.
[Lowest S/S Setting]: Choose the shutter speed at which the
camera starts raising ISO sensitivity automatically in modes
P and A. Choose [Auto] to let the camera choose a shutter
speed automatically.
Choose the shooting modes in which [AUTO] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M.
[All]: Auto ISO sensitivity selection is available in all modes.
Choose the amount of noise reduction performed at high
ISO sensitivities.
This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is performed at slow shutter speeds,
or when the internal temperature of the camera has risen.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• The time required for noise reduction is shown in the
display.
• [Off] is selected automatically during sequential shooting.
• This function may not work effectively with some shooting
conditions or subjects.
Description
MENU
G T
g
—
—
—
—
—
—
—
4
EN 169