Changing Iso Sensitivity (Iso); Choosing A Focus Mode (Af Mode); Recommended Iso - Olympus V207090SU000 Instruction Manual

Changing ISO sensitivity
You can set the ISO sensitivity.
g "Changing ISO sensitivity (ISO)" (P. 70)
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [ISO].
2
3
Use the front dial to select an option.
Choosing a focus mode
You can select a focusing method (focus mode). You can choose separate focusing
methods for still photography mode and movie mode.
1 Press the Q button to display the LV super control
panel.
2
Use FGHI to select [AF Mode].
3
Use the front dial to select an option.
S-AF
(Single AF)
C-AF
(Continuous AF)
MF
(Manual focus)
S-AFb
(Simultaneous use of
S-AF mode and MF
mode)
80 EN
The camera focuses once when the shutter button is pressed
halfway. When the focus is locked, a beep sounds, and the AF
confi rmation mark and the AF target mark light up. This mode is
suitable for taking pictures of still subjects or subjects with limited
movement.
The camera repeats focusing while the shutter button remains
pressed halfway. When the subject is in focus, the AF
confi rmation mark lights up on the monitor and the beep sounds
when the focus is locked at the fi rst time.
Even if the subject moves or you change the composition of the
picture, the camera continues trying to focus.
This function allows you to manually
focus on any position by operating the
focus ring on the lens.
After pressing the shutter button halfway to focus in [S-AF]
mode, you can turn the focus ring to fi ne-adjust focus manually.
(ISO)
ISO

Recommended ISO

A ± 0 Natural
ISO WB
Auto Auto
G ± 0 S ± 0
S-AF
± 0 ± 0 Normal
± 0.0
sRGB
S-IS AUTO
4K
F
30 p 30 p
M-IS
P 250 F5.6
(AF Mode)
AF Mode
K AF Mode
A ± 0 Natural
ISO WB
Auto Auto
G ± 0 S ± 0
S-AF ± 0 ± 0
Normal
± 0.0
sRGB
S-IS AUTO
4K
F
30 p 30 p
M-IS
P
250 F5.6
Near
)
Focus ring
± 0
1:02:03
1023
± 0
1:02:03
1023