Olympus V207090SU000 Instruction Manual page 132

• If either of the time before shooting, or shooting interval is set to 1 minute 31 seconds
or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before
shooting, the power will automatically turn on again. When the monitor is off, press the
shutter button to turn it on again.
• If the AF mode (P. 80) is set to [C-AF] or [C-AF+TR], it is automatically changed to
[S-AF].
• Touch operations are disabled during time lapse shooting.
• This function cannot be used with HDR photography.
• Time-lapse shooting cannot be combined with bracketing or multiple exposure.
• The fl ash will not work if the fl ash charging time is longer than the interval between shots.
• If the camera automatically turns off in interval between shots, it will turn on in time for the
next shot.
4
• If any of still pictures are not recorded correctly, the time lapse movie will not be
generated.
• If there is insuffi cient space on the card, the time lapse movie will not be recorded.
• Time lapse shooting will be canceled if any of the following is operated:
Mode dial, MENU button, q button, lens release button, or connecting the USB cable.
• If you turn off the camera, time lapse shooting will be canceled.
• If there is not enough charge left on the battery, the shooting may end partway through.
Make sure the battery is charged enough before shooting.
• Time-lapse movies created at a size of [4K] may not display on some computer systems.
More information is available on the OLYMPUS website.
Varying settings over a series of photographs
Bracketing is used to vary shooting settings such as exposure and white balance
over a series of shots. Depending on the setting, you may be able to combine several
different forms of bracketing. Use bracketing if you are unsure what settings to use or
lack the time needed to change settings during shooting. You can also store bracketing
settings and later recall them simply by turning bracketing on.
AE BKT (AE bracketing)
The camera varies the exposure of each shot. You can select
the bracketing increment from 0.3 EV, 0.7 EV, and 1.0 EV. In
single-frame shooting mode, one photograph is taken each
time the shutter button is pressed all the way down, while in
sequential shooting mode the camera continues to take shots
in the following order while the shutter button is pressed all the
way down: no modifi cation, negative, positive. Number of shots:
2, 3, 5, or 7
• The camera modifi es exposure by varying aperture and shutter speed ( P mode), shutter
speed (A and M modes), or aperture (S mode). If [All] is selected for [ISO-Auto] (P. 169)
in M mode and [AUTO] is selected for [ISO] (P. 70, 80), the camera modifi es
exposure by varying ISO sensitivity.
• The camera brackets the value currently selected for exposure compensation.
• The size of the bracketing increment changes with the value selected for [EV Step].
g [EV Step] (P. 169)
• Exposure bracketing cannot be combined with FL or focus bracketing.
132 EN
(Bracketing)
Bracketing
AE BKT 2F1.0EV Off
WB BKT 2f 0.3EV A-- G--
FL BKT 2f 0.7EV
ISO BKT 2f 1.0EV
ART BKT 3f 0.3EV
Focus BKT 3f 0.7EV
3f 1.0EV
Back Set
--
--
--
--