TP-Link TL-WR941HP User Manual page 83

Click the Delete All button to delete all the entries in the table.
Click the Next button to go to the next page, or click the Previous button to return to the
previous page.
For example: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1. Click Add New... button in Figure 3-54 to enter the Add or Modify a Host Entry page.
2. In Mode field, select MAC Address from the drop-down list.
3. In Host Description field, create a unique description for the host (e.g. Host_1).
4. In MAC Address field, enter 00-11-22-33-44-AA.
5. Click Save to complete the settings.
Then you will go back to the Host Settings page and see the following list.
3.4.10.3. Target
Go to "Advanced→Access Control→Target", and then you can view and set a Target list in
the screen as shown in Figure 3-57. The target list is necessary for the Access Control Rule.
 Target Description - Displays the description about the target and this description is
unique.
 Information - The target can be IP address, port, or domain name.
 Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
Click the Add New... button.
1.
2. In Mode field, select IP Address or Domain Name.
3. If you select IP Address, the screen is shown as Figure 3-58.
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 3-57 Target Settings
72