TP-Link TL-WR941HP User Manual page 156

5.3.3.4. Wireless MAC Filtering
Go to "Setting→Wireless→Wireless MAC Filtering", and then you can control the wireless
access by configuring the Wireless MAC Filtering function.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

MAC Address - The wireless station's MAC address that you want to access.

Status - The status of this entry, either Enabled or Disabled.

Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or
Modify Wireless MAC Address Filtering entry" page will appear.
Figure 5-12 Add and modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 5-11 Wireless MAC Filtering
145