TP-Link TL-WR941HP User Manual page 178

Figure A-5 Add or Modify a Virtual server Entry

Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
How to enable DMZ Host: Log in to the router, Go to "Advanced→Forwarding→
4)
DMZ". On the "DMZ" page, click Enable radio button and type your IP address into the
"DMZ Host IP Address" field, using 192.168.0.169 as an example, remember to click
the Save button.
TL-WR941HP 450Mbps High Power Wireless N Router
Figure A-4 Virtual Servers
Figure A-6 DMZ
167