TP-Link TL-WR941HP User Manual page 128

1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disable All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page.
Click the Previous button to return to the previous page.
4.3.3.4. Wireless Advanced
Go to "Setting→Wireless→Wireless Advanced", and then you can configure the advanced
settings of your wireless network.

Transmit Power - Here you can specify the transmit power of Router. You can select
100%, 75% or 50% which you would like. 100% is the default setting and is
recommended.
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 4-11 Wireless Advanced
117