TP-Link TL-WR941HP User Manual page 79

If the IP Address is selected, you will see the following items:

IP Address - Enter the IP address (or address range) of the target (targets) in
dotted-decimal format (e.g. 192.168.0.33).

Target Port - Specify the port or port range for the target. For some common service
ports, you can make use of the Common Service Port item below.

Protocol - Here are four options, All, TCP, UDP, and ICMP. Select one of them from
the drop-down list for the target.

Common Service Port - Lists some common service ports. Select one from the
drop-down list and the corresponding port number will be filled in the Target Port field
automatically. For example, if you select "FTP", "21" will be filled in the Target Port
automatically.
If the Domain Name is selected, you will see the following items:

Domain Name - Here you can enter 4 domain names, either the full name or the
keywords (for example, tp-link). Any domain name with keywords in it
(www.tp-link.com, www.tp-link.cn) will be blocked or allowed.
Figure 3-50 Quick Setup - Create an Access Target Entry
3. Click Next when finishing creating the access target entry.
Figure 3-51 Quick Setup – Create an Advanced Schedule Entry
TL-WR941HP 450Mbps High Power Wireless N Router
68