TP-Link TL-WR941HP User Manual page 125


Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.

Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the WPA/WPA2-Personal
find a notice in red as shown below.

Wireless Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should be between
8 and 63 characters.

Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Click the Save button to save your settings on this page

WEP
TL-WR941HP 450Mbps High Power Wireless N Router
Figure 4-7 WPA/WPA2 - Personal
radio button and choose TKIP encryption, you will
114