TP-Link TL-WR941HP User Manual page 23

2.4.3.1. Step one: configure
Using RE Button is an easy way to extend your host network. We recommend you to use this
way if your host router has the WPS button. The button might look like these:
Option One: Using RE Button
1. Press the WPS button on the host router.
2. Press and hold the
minute. The router will start to reboot.
3. After rebooted, the RE LED should change from blinking to a solid state, indicating a
successful connection.

Note:
If not, please refer to the Option Two.
Option Two: Using Web Browser
1. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(wireless name) and password printed on the bottom label of the router.
2. Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for both
username and password, and then click Login.
TL-WR941HP
RE button on the top panel of router for about 3 seconds within 1
Login the Router
Figure 2-5
12
450Mbps High Power Wireless N Router