Encryption - You can select Automatic (Recommended), TKIP or AES as Encryption.
The default setting is AES.
Note:
If you choose TKIP encryption, you will find a notice in red as shown below.
Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page "Bandwidth Control->Control Settings".
3.4.6 DHCP
There are three submenus under the DHCP menu: DHCP Settings, DHCP Clients List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
functions.
TL-WR941HP
450Mbps High Power Wireless N Router
48