Installing the Printer
You can install this printer horizontally. With an optional hanging bracket (WH-10), you can also attach the
printer to a wall.
Important Notes on Horizontal Installation
• The printer must be installed horizontally on a flat surface (not tilted).
• Do not place the printer in dusty locations.
• Do not catch cables or place foreign matter under the printer.
Important Notes on Wall Hanging
You need to perform the following tasks to install the printer on a wall. For more details, see the installation
manual for the optional wall hanging bracket (WH-10).
• Installing the roll-paper stoppers
• Changing the location of the roll paper near-end sensor
• Attaching the connector cover
• Attaching the wall hanging bracket (WH-10)
For the other notes, see the installation manual for the optional wall hanging bracket (WH-10).
• Be sure to attach the connector cover when you install the printer on a wall using the wall hanging
• When installing on a wall using a wall mounting bracket, the status of the wireless signal for the
bracket.
wireless LAN unit may decline. In this situation, use an extension cable.
Chapter 2 Setup
30