Snmp Settings - ZyXEL Communications EX3510-B0 User Manual

SNMP itself is a simple request/response protocol based on the manager/agent model. The manager
issues a request and the agent returns responses using the following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an agent.
In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a Get
operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
Trap - Used by the agent to inform the manager of some events.

30.2 SNMP Settings

Click Maintenance > SNMP to open the following screen. Use this screen to configure the Zyxel Device
SNMP settings.
Configure how the Zyxel Device reports to the Network Management System (NMS) via SNMP using the
screen below.
Figure 160 Maintenance > SNMP
Chapter 30 SNMP
EX3510-B0 User's Guide
249