ZyXEL Communications EX3510-B0 User Manual page 65

Figure 30 WiFi Settings
Click the Arrow icon ( ) to open the following screen. Use this screen to configure the SSIDs and/or
passwords for your main wireless networks. Select Keep 2.4G and 5G the same to use the same SSID for
2.4 GHz and 5 GHz bands.
Figure 31 WiFi Settings: Configuration
Each field is described in the following table.
Table 8 WiFi Settings: Configuration
LABEL DESCRIPTION
Keep 2.4G and 5G Select this and the 2.4G and 5G wireless networks will use the same SSID.
the same
If you deselect this, the screen will change. You need to assign different SSIDs for the 2.4G
and 5G wireless networks.
2.4G/5G WiFi Click this switch to enable or disable the 2.4G and/or 5G wireless networks. When the switch
goes to the right
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for WiFi.
Chapter 5 Connection Status
, the function is enabled. Otherwise, it is not.
EX3510-B0 User's Guide
65