Add New/Edit Protocol Entry - ZyXEL Communications EX3510-B0 User Manual

Figure 122 Security > Firewall > Protocol
The following table describes the labels in this screen.
Table 78 Security > Firewall > Protocol
LABEL
Add New
Protocol Entry
Name
Description
Ports/Protocol
Number
Modify

16.3.1 Add New/Edit Protocol Entry

Use this screen to add a customized service rule that you can use in the firewall's ACL rule configuration.
Click Add New Protocol Entry or the Edit icon next to an existing service in the Protocol screen to display
the following screen.
Figure 123 Protocol Entry: Add New/Edit
Chapter 16 Firewall
DESCRIPTION
Click this to add a new service.
This is the name of your customized service.
This is the description of your customized service.
This shows the IP protocol (TCP, UDP, ICMP, or TCP/UDP) and the port number or range of ports
that defines your customized service. Other and the protocol number displays if the service uses
another IP protocol.
Click the Edit icon to edit the entry.
Click the Delete icon to remove this entry.
EX3510-B0 User's Guide
201