25.1 Multicast Status Overview
Use the Multicast Status screens to view IPv4 or IPv6 multicast group information.
25.2 IGMP Status
Use this screen to look at the current list of IPv4 multicast groups the Zyxel Device manages through
IGMP. Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish
membership in a Multicast group - it is not used to carry user data. You can configure IGMP settings in
Network Setting > IGMP/MLD.
Figure 150 System Monitor > Multicast Status > IGMP Status
The following table describes the labels in this screen.
Table 104 System Monitor > Multicast Status > IGMP Status
LABEL
Refresh
Interface
Multicast Group
Filter Mode
Source List
Member
Chapter 25 Multicast Status
DESCRIPTION
Click this button to update the information on this screen.
This field displays the name of the Zyxel Device's interface that belongs to an IGMP multicast
group.
This field displays the address of the IGMP multicast group to which the interface belongs.
INCLUDE means that only the IP addresses in the Source List get to receive the multicast group's
traffic.
EXCLUDE means that the IP addresses in the Source List are not allowed to receive the multicast
group's traffic but other IP addresses can.
This lists the IP addresses that are allowed or not allowed to receive the multicast group's traffic
depending on the filter mode.
This lists the IP address of members currently in the multicast group.
EX3510-B0 User's Guide
C
H A P T E R
Multicast Status
236
25