Editing The Effects Of The Studio Set; Editing The Effects Of The Tone - Roland FA-07 Reference Manual

Editing the Effects of the Studio Set

Here's how to edit the effects of the studio set.
1.
Access the EFFECTS EDIT screen (p . 52) .
2.
Press the effect button .
The STUDIO SET EFFECTS screen appears.
Button Explanation
[3] (Chorus)
Edits the chorus settings.
[4] (Reverb)
Edits the reverb settings.
Specifies the output destination of the drum part's
compressor and equalizer.
[SHIFT] + [3]
(Comp+EQ Output)
* This is valid only if the tone of the part specified by
Drum Comp+EQ Assign is either PCMD or SN-D.
Applies a final adjustment (compression) to the
[SHIFT] + [7]
overall sound of the studio set.
(Master Comp)
*
When M.COMP/IFX Select is set to
Edits the insert effect settings.
[SHIFT] + [7] (IFX)
* When M.COMP/IFX Select is set to
3.
Use the cursor buttons to select a parameter, and use the
dial to edit the value .
MEMO
For details on the parameters, refer to
(PDF).
"Master Comp."
"IFX."
"Parameter Guide"

Editing the Effects of the Tone

Here's how to edit the MFX and the compressor/equalizer of the
drum part.
1.
Access the EFFECTS EDIT screen (p . 52) .
2.
Press the effect button .
The TONE EDIT screen appears.
Button Explanation
[2] (MFX)
Edits the MFX (multi-effect) settings.
Edits the compressor and equalizer of the drum part.
* This can be edited only if the part 10 drum kit is
[SHIFT] + [2]
selected.
(Comp+EQ)
* This is valid only if the tone of the part specified by
Drum Comp+EQ Assign is either PCMD or SN-D.
3.
Use the cursor buttons to select a parameter, and use the
dial to edit the value .
MEMO
For details on the parameters, refer to
(PDF).
Editing the Effects
"Parameter Guide"
53