Getting Ready; Placing This Unit On A Stand - Roland FA-07 Reference Manual

Getting Ready

Placing This Unit on a Stand

Be careful not to pinch your fingers when setting up the stand.
Place the instrument on the stand as follows.
* When using the KS-18Z, ensure that the height of the unit is one meter or lower.
If you're using the FA-06/FA-07
If you want to place the FA-06/FA-07 on a stand, please use the KS-12 or KS-18Z stands manufactured by Roland.
*
The illustration shows the FA-06.
KS-12
KS-18Z
Align the front of the
FA with the front of
the stand
Adjust so that the
height does not
exceed 1 meter
(Adjust the stand
to a level no
higher than the
fifth level from
the bottom)
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard fit into the rubber
feet receptacles
Top view
Adjust the width of the stand
so that the rubber feet of the FA
straddle the stand
Top view
17