Editing A Tone; Basic Procedure For Tone Edit; Supernatural Acoustic Tone (Sn-A); Supernatural Synth Tone (Sn-S) - Roland FA-07 Reference Manual

Editing a Tone

Here's how to edit the tone that's assigned to a part.

Basic Procedure for Tone Edit

1.
Select the part to which the tone is assigned .
2.
Press the [MENU] button .
3.
"Tone Edit"
Move the cursor to
button .
The TONE EDIT screen appears.
The TONE EDIT screen differs according to the type of tone that's
selected for the part.
4.
Use the cursor buttons to select an item, and use the dial
to edit the value .
NOTE
Edits you make to a tone are temporary. The changes you make
are lost when you turn off the power or select another tone. If
you want to keep the edited settings, save the tone (p. 48).
MEMO
• From the STUDIO SET PLAY screen, you can also access the TONE
EDIT screen by holding down the
the [2] (Tone Edit) button.
• In the TONE EDIT screen, you can also press the
button to switch the part that you're editing.
•
For details on the tone parameters, refer to
(PDF).

SuperNATURAL Acoustic Tone (SN-A)

Inst
Tab Explanation
Common Settings that apply to the entire tone.
Settings for the INST assigned to the tone.
Inst
These are detailed settings for the INST that's
assigned.
MFX Settings for the multi-effect.
MFX Control Settings for controlling MFX via MIDI.
Inst
"inst"
An is the smallest unit of sound within a
SuperNATURAL acoustic tone. Each SuperNATURAL acoustic
tone consists of a single
46
[ENTER]
and press the
[SHIFT]
button and pressing
[6] (Part Select)
"Parameter Guide"
MFX
"inst."

SuperNATURAL Synth Tone (SN-S)

Partial 3
Partial 2
Partial 1
LFO
OSC Filter
Aftertouch
Modulation LFO
Modify
Tab Explanation
Common Settings that apply to the entire tone.
Settings for the waveform that is the basis of the
OSC
tone.
Pitch Settings related to pitch.
Filter
Settings related to the filter.
Amp Settings related to the volume.
LFO
Settings for the LFO that modulates the sound.
Modulation LFO Settings for the modulation applied to the sound.
Settings related to aftertouch.
MEMO
To use aftertouch, assign it to a SOUND MODIFY
Aftertouch
knob or the D-BEAM controller. For details on how
to make these settings, refer to
for the Studio Set"
Entire"
Misc Settings for envelopes and portamento time control.
MFX Settings for the multi-effect.
MFX Control Settings for controlling MFX via MIDI.
Partial
"partial"
A is a unit of sound within a SuperNATURAL synth
tone, SuperNATURAL drum kit, PCM synth tone, or PCM drum
kit. These tones consist of multiple partials.
MFX
Amp
"Overall Settings
"Settings for the
(p.44) or
(p.97).