Table of Contents
Advertisement
° Recording Your Performance
Recording Your Keyboard Performance
You can record your own keyboard performance, and then play back
to check it.
Getting Ready to Record
1.
Select the tone that you want to play.
2.
You can sound the metronome if you like.
Set the metronome's tempo and time signature. The metronome
setting is stored in the song, and you can use the same settings
during playback.
3.
Press the [t] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
Starting/Stopping Recording
4.
Press the [s] button.
After a one-measure count, recording starts, and the [7]
button and [s] button are both lit. The performance is saved
automatically.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
5.
To stop recording, press the [s] button once
again.
Recording stops.
Listening to the Recorded Performance
6.
Press the [s] button.
After you record, the newly recorded song is selected.
The recorded song starts playing back.
Deleting a Saved Song
You can delete a song that you saved.
MEMO
5 You can also delete a recorded song by holding down the [7]
button and pressing the [ ] button.
5 If you want to delete all songs that have been saved to internal
memory, initialize the memory ("Initializing the Memory
(Format Media)" (p. 23)).
1.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2.
Turn the [ ] knob to access the "Delete Song"
screen.
3.
Press the [ ] knob to confirm.
The Delete Song screen appears.
4.
Turn the [ ] knob to select the media that contains
the song you want to delete, and press the [ ] knob
to confirm.
5.
Turn the [ ] knob to select the song that you want
to delete, and press the [ ] knob to confirm.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
6.
Turn the [ ] knob to select "Yes," and press the [ ]
knob to confirm.
The deletion is executed.
Managing songs you recorded
Operation
You can rename a saved song.
1.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2.
Turn the [ ] knob to access the "Rename Song" screen,
and press the [ ] knob to confirm.
3.
Turn the [ ] knob to select the media that contains the
song you want to rename, and press the [ ] knob to
confirm.
4.
Turn the [ ] knob to select the song that you want to
rename, and press the [ ] knob to confirm.
5.
Rename the song.
Select the character which
you want to change
Renaming
a recorded
Change the character
song
Insert one character
Delete one character
Turn the [ ] knob to select the ( at the right edge of
6.
the screen, and then press the [ ] knob to confirm.
A confirmation message appears.
7.
Turn the [ ] knob to select "Yes," and press the [ ] knob
to confirm.
The song is renamed.
* Never turn off the power or disconnect the USB flash drive
while the screen indicates "Executing... "
8.
Press the [ ] button.
You exit function mode.
Turn the [ ] knob
Press the [ ] knob (confirm)
/
Turn the [ ] knob (change the character)
/
Press the [ ] knob (back)
Press the [s] button
Press the [7] button
13
Advertisement
Table of Contents
