Finish Notice - Kyocera 1102H03NL0 Advanced Operation Manual

Sending Functions

Finish Notice

2-32
This feature sends an e-mail providing notification that transmission has
been completed.
Use the procedure below to specify the Finish Notice settings.
1 Place the originals on the platen.
2
Press the Send key.
3
Press [Advanced Setup] and then [Job Finish Notice]
4 To select the
destination from the
address book, press
[Address Book] on
the left of the screen
and then press
[Address Book] in
the next screen.
Select the
destination to be
notified, then press
[OK].
You can view information on the notification destination by pressing
[Detail].
5
Specify the destination to send the finish notice, and press [OK].
NOTE:
For the procedure to select the destination from the Address
Book, refer to the Operation Guide.
6
To directly enter the
address, press
[Address Entry] and
then [E-mail
Address].
7
Enter the E-mail address, and press [OK].
8 Press [OK].
Ready to send.
Place original .
Job Finish Notice
Off
Destination
Address Book
Address
Entry
Detail
Add Shortcut
Status
Ready to send.
Place original.
Job Finish Notice
Off
E-mail
Address Book
Address
Address
Entry
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Destination
1
Detail
Address Book
Cancel OK
10/10/2007 10 :10
Destination
1
Cancel OK
10/10/2007 10 :10