Table of Contents
Advertisement
Wide A4
Form Feed Timeout
ADVANCED OPERATION GUIDE
Increase the number of characters per line for A4 paper.
Use the procedure below to specify the Wide A4 setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Wide A4.
3
Press [Off] or [On].
4
Press [OK].
Receiving print data from the computer, the machine may sometimes wait
if there is no information signalling that the last page does not have any
more data to be printed. When the preset timeout passes, the machine
automatically prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1
Press the System Menu key.
2
Press [Printer], [ ] and [Change] of Form Feed Timeout.
3
Press [+] or [–] to set
the Form Feed
Timeout.
You can set the
timeout delay in
seconds.
You cannot use the
number keypad to
enter this value.
4
Press [OK].
Printer - Wide A4
Enlarge the print area for A4 paper .
On
Off
Status
Printer - Form Feed Timeout
Set the amount of time to wait from the last transmission
before automatic form feed is initiated .
(5 - 495)
30
Status
System Menu
Cancel
OK
10/10/2007
10 :10
sec.
Cancel
OK
10/5/2006
10 :10
6-53
6
Advertisement
Table of Contents
