Kyocera 1102H03NL0 Advanced Operation Manual page 238

System Menu
Display Brightness
Silent Mode
6-68
3
Press [Off],
[On(Low)] or
[On(High)].
4
Press [OK].
Set the brightness of the touch panel.
Use the procedure below to adjust the display brightness.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and [Change] of Display Brightness.
3
Press [1] - [4]
(Darker- Lighter) to
adjust brightness.
4
Press [OK].
Make the machine run more quietly. Select this mode when the running
noise is uncomfortable.
Use the procedure below to set Silent mode.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and [Change] of Silent Mode.
Adjustment /Maintenance - Correcting Fine Black Line
Reduce the visibility of fine black lines if they
appear in a scanned image .
*Small characters will also become less visible .
Off On( Low)
Status
Adjustment /Maintenance - Display Brightness
Set the brightness of the screen.
Darker
1 2
Status
ADVANCED OPERATION GUIDE
On(High)
Cancel OK
10/10/2007 10 :10
Lighter
3 4
Cancel OK
10/10/2007 10 :10