Table of Contents
Advertisement
Copying Functions
Cover Mode
1-36
Add a cover to the finished copies. You can copy the first page and/or the
last page onto colored paper or thick paper fed from the different paper
source than the regular one. The following two options are available. Paper
for the cover is supplied from the Multi Purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover
Paper on page 6-15.
Type of Cover
Front Cover
Front and Back
Covers
The procedure for using Cover mode copying is explained below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Layout/Edit] and then [Cover].
4
Press [Front Cover]
or [Front and Back
Covers].
5
Press [OK].
6
Press the Start key.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
Description
First page of the originals is copied on a different
paper.
First page and last page of the originals are
copied on different paper.
Ready to copy.
Cover
Add a cover page of a different color or
thickness, using a different paper source.
Please choose either [Front Cover] or
[Front and Back Covers].
Press [ OK] to display
*Set paper source for cover in System Menu.
the image.
None
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copies
1
Front Cover
Front and Back
Covers
Cancel
OK
10/10/2007
10 :10
Advertisement
Table of Contents
