Kyocera 1102H03NL0 Advanced Operation Manual page 41

ADVANCED OPERATION GUIDE
In each option, the available ranges are as below.
Input units
Inch Models
Metric Models
NOTE:
To specify the default width value of Border Erase, refer to Border
Erase Default on page 6-28 for details.
Use the procedure below to erase borders when copying.
1
Place the originals on the platen.
2 Press the Copy key.
3
Press [Layout/Edit] and then [Border Erase].
4
Select [Border Erase Sheet] to erase borders for an individual sheet or
[Border Erase Book] to erase borders for a book.
Use [+] or [–] to enter
the width in Border
or Gutter. Press [#
Keys] to use the
numeric keys for
entry.
Press [Individual
Border Erase] to
select the individual
border erase.
Use [+] or [–] to enter
the width in Top,
Bottom, Left or
Right. Press [#
Keys] to use the
numeric keys for
entry.
Press [Original Orientation] to select the original orientation from either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
5 Press [OK].
Border Erase Range
0 to 2"(in 0.01" increments)
0 mm to 50 mm (in 1-mm increments)
Ready to copy.
Border Erase
Border
Off
Border Erase
Press [ OK] to display
Sheet
the image.
Border Erase
Book
Gutter
Individual
Border Erase
Add Shortcut
Status
Ready to copy.
Border Erase
Off
Border Erase
Press [ OK] to display
Sheet
the image.
Border Erase
Book
Individual
Border Erase
Add Shortcut
Status
Copying Functions
Copies
1
(0.00 - 2.00)
0.00
"
# Keys
(0.00 - 2.00)
0.00
"
# Keys
Cancel OK
10/10/2007 10 :10
Copies
1
(0.00 - 2.00)
Top
0.00
"
Bottom
0.00 "
Left
0.00
"
Right
0.00 "
Top Edge Top
# Keys
Original
Orientation
Cancel OK
10/10/2007 10 :10
1-27
1