Kyocera 1102H03NL0 Advanced Operation Manual page 184

System Menu
6-14
3
Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to
disable automatic
detection or [On] to
enable automatic
detection of Folio
and 11x15"
respectively.
4
Press [OK].
Media for Auto Selection
Select a default media type for auto paper selection when [Auto] is
selected of Paper Selection. If Plain is selected, the paper source with plain
paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
Use the procedure below to select the paper size and media type used by
Auto Selection.
1
Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Setup and then
[Change] of Media for Auto Selection.
3
Select [All Media
Types] or any media
type for paper
selection.
4
Press [OK].
Common Settings - Original Auto Detect Setup
Automatically detect originals of special or non -standard size.
A6
A6/Hagaki
Folio Off
11x15" Off
Status
Common Settings - Media for Auto Selection
Select default type of paper for auto paper selection.
Plain Transparency
All Media
Types
Labels Recycled Preprinted
Color Prepunched Letterhead
High Quality Custom 1 Custom 2
Custom 5 Custom 6 Custom 7
Status
ADVANCED OPERATION GUIDE
Hagaki
On
On
Cancel OK
10/10/2007 10 :10
Rough Vellum
Bond Cardstock
Envelope Thick
Custom 3 Custom 4
Custom 8
Cancel OK
10/10/2007 10 :10