Ricoh D649 Field Service Manual page 87

Maximum print width used in the
setup protocol
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Received message width
restriction in the protocol signal to
the sender
7
0: Disabled
1: Enabled
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
No paper available (Paper end)
No Function
Setting
These bits are only effective when bit 7 of the printer
Not used
switch 01 is "1".
A3
B4
A4
Do not change the settings.
0: The machine informs the transmitting machine of the
print width depending on the paper size available from
the paper feed stations.
Refer to the table on the next page for how the machine
chooses the paper width used in the setup protocol
(NSF/DIS).
1: The machine informs the transmitting machine of the
fixed paper width which is specified by bits 3 and 4
above.
Printer width used in the Protocol (NSF/DIS)
297 mm width
256 mm width
216 mm width
216 mm width
Printer Switch 02 (SP No. 1-103-003)
Bit Switches
Comments
85