ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual page 51

FIELD
Accounting Port
Secret Key
Secondary Server
Server IP
Authentication Port
Accounting Port
Secret Key
RADIUS Common Settings
Accounting Type
Accounting Service
Authentication Method
Transmission Attempts
Pop-up Logout Window
Super User Account
Username
Password
On Line Sign Up
Select Enable to activate this feature and set the following fields.
Connection Duration
Min(s) (1-1440)
Account Server
IP/Domain Name
URL
Subscriber Control
Table 5-5 Subscriber Control: RADIUS
Specify the accounting port of the primary RADIUS server. The common port numbers are 1646 and
1813.
Specify a password (up to 31 alphanumeric characters) as the key to be shared between the primary
RADIUS server and the VSG.
The key is not sent over the network. This key must be the same on the primary RADIUS server and
the VSG.
Enter the IP address of the secondary authentication server in dotted decimal notation.
Specify the authentication port of the secondary RADIUS server. The common port numbers are 1645
and 1812.
Specify the accounting port of the secondary RADIUS server. The common port numbers are 1646
and 1813.
Specify a password (up to 31 alphanumeric characters) as the key to be shared between the
secondary RADIUS server and the VSG.
The key is not sent over the network. This key must be the same on the secondary RADIUS server
and the VSG.
Select Accumulation for multiple re-login until the time allocated is used up. If a subscriber logs out
and access the Internet again within the time period specified in the Idle Timeout field, the subscriber
does not have to enter the user name and password again to log in.
Select Time to Finish to allow one-time login.
Select Enable from the drop-down list box to activate the accounting feature. Otherwise, select
Disable to de-activate the accounting feature.
Select either the CHAP or PAP authentication method from the drop-down list box.
Specify the number of times (1 to 3) the VSG resends an authentication request to the primary and/or
secondary RADIUS servers.
Select Enable to automatically displays a pop-up window after a successful login. This window
displays either the remaining time or the time used, depending on the accounting type and the
RADIUS server setting.
Select Disable to not display the pop-up window automatically. See Section 5.2.7 on how to open the
pop-up window manually if applicable.
Select Enable from the drop-down list box to activate the super user account.
Refer to the Super User Account section for more information.
Enter the username for the super user account.
Enter the password for the super user account.
Specify how long a subscriber is allowed to access the web site for entering credit card information
before Internet access is disconnected.
Enter the time interval between 1 and 1440 minutes.
Enter the IP address or domain name of the subscriber account server.
Enter the web site address of the secure web site for entering credit card information.
VSG-1000 Vantage Service Gateway
DESCRIPTION
5-7