Table of Contents
Advertisement
VSG-1000 Vantage Service Gateway
Chapter 7
Subscriber Login Screen
This chapter shows you how to customize the subscriber login screen when subscriber control is
activated.
7.1 Overview
The subscriber login screen is the first screen that all subscribers see when trying to access the Internet. You can
configure up to three web addresses for web sites which all subscribers are allowed to access without logging in.
You must first activate subscriber control in the Subscriber Management screen.
Use the Customize Login Screen screen to configure the subscriber login screen. From the Main Menu screen,
click Configuration, Subscriber Management and Customize Login Screen.
There are three ways in which you can customize the login screen: Standard, Advanced and Frame.
7.2 Standard Login Screen
The standard login screen is the VSG's pre-configured, default simple login screen. You can not change the
standard login screen.
To set the VSG to display the standard login screen, select Standard in the Selection field.
Figure 7-1 Customize Login Screen: Standard
The following figure shows the default subscriber login screen.
Figure 7-2 Standard Subscriber Login Screen
7.3 Advanced Login Screen
Use the advanced login screen option to customize a login screen where you can create a welcome slogan and add
advertising information. Select Advanced in the Selection field in the Customize Login UI screen.
Subscriber Login Screen
7-1
Advertisement
Table of Contents
Troubleshooting
