----------- TFTP download parameters -----------
IP address
TFTP server IP address :10.59.1.33
Gateway IP address
Subnet mask
File name
------------------------------------------------
Do you want to change above entries(Y/N)?n
Figure 15-5 SMT: Debug Mode: Verifying VSG and TFTP Settings
7. The VSG downloads the firmware. After the file transfer is complete, the VSG restarts automatically.
Do you want to change above entries(Y/N)?n
Attached TCP/IP interface to rtl1.
Attaching network interface lo0... done.
Downloading...
100%
Erasing FLASH...OK
Writing to FLASH...OK
Restarting...
8. After the VSG finishes restarting, you should see the "Press any key to continue" prompt,
press any key to display the SMT login screen. Enter "admin" as the username and "1234" as the password
to access the VSG.
Troubleshooting
:10.59.1.1
:10.59.1.33
:255.0.0.0
:VSG1000-10303.bin
Figure 15-6 SMT: Debug Mode: Firmware Upload Complete
VSG-1000 Vantage Service Gateway
15-5