VSG-1000 Vantage Service Gateway
(c) 2000-2003 ZyXEL Communications Corporation. All Rights Reserved.
The VSG automatically logs you out after ten (default) minutes of inactivity. Simply log back into
12.3 The SMT Main Menu Summary
The SMT main menu is shown next.
Enter a numeric between 1-6.
The following table describes the menu choices in this screen.
NUMBER
MENU TITLE
1
System Configuration
2
Status
3
Utilities
4
Restart
5
Logout
6
Factory Setting
12.4 Navigating the SMT Interface
Familiarize yourself with the SMT operations before you attempt to modify the configuration.
12.4.1
SMT Screen Breakdown
The following figure shows the breakdown of most SMT screens.
12-2
VSG-1000
Version 1.06
Username:
Password:
Figure 12-2 SMT: Login Screen
the VSG if this happens to you.
Main Menu
1)System Configuration
2)Status
3)Utilities
4)Restart
5)Logout
6)Factory Setting
Enter selection:
Figure 12-3 SMT: Main Menu
Use this menu to set up LAN IP address, DHCP settings, WAN port configuration and
general system setup.
Use this menu to view the current configuration of the VSG.
Use this menu to perform firmware upgrade and change login password.
Use this menu to restart your VSG.
Use this menu to log out of the SMT.
Use this menu to reset the VSG back to factory default settings.
FUNCTION
The SMT