Table 4-7 Syslog Description - ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual

LABEL
Public Address List
Apply
Clear
Home
Previous
The following table describes the system logs you may select in the System Configuration screen.
TYPE
System Boot Notice
System Information
System Manager Activity
Information
NAT Pool Exhausted
Notice
System Configuration
Table 4-6 System Configuration
Specify the beginning and ending IP addresses of the address pool in the fields provided.
You can configure up to five address pools on the VSG.
Make sure the total number of addresses in the address pool does not
The following shows three NAT pool examples if the VSG is using a WAN public IP address of
211.21.21.1:
Group 1: 211.21.21.2 ~ 211.21.21.6 (five IP addresses)
Group 2: 211.21.21.20 ~ 211.21.21.29 (ten IP addresses)
Group 3: 211.21.21.60 ~ 211.21.21.69 (ten IP addresses)
Group 4: 211.21.21.75 ~ 211.21.21.76 (two IP addresses)
Click Apply to save the changes back to VSG and go back to the Utility Menu.
Click Clear to start configuring this screen again.
Click Home to go back to the Main Menu screen. The changes you made will not be saved if you
have not clicked Apply.
Click Previous to go back to the previous screen. The changes you made will not be saved if you
have not clicked Apply.

Table 4-7 Syslog Description

LOG FORMAT
Date/Time)(SystemName)(Id, Mac Address)(System Up)
(Id, Mac Address) (System Uptime, 0 days 00h:04m:00s,
System IP 120.1.1.1, System name,) (Logged-in Users,
Number of logged-in users, Start Number, End number)
(Username, user IP, user MAC)(...)(...)
(Date/Time)(SystemName)(Id, Mac Address) (System
Manager Activity Information, Username, User IP,
Status)Username : Administrator | Account
ManagerStatus : Login | Logout | Idle Time Out | Login
Fail
(Date/Time)(SystemName)(Id, Mac Address)(NAT Pool
Exhausted, type)
Type: IP / Port
VSG-1000 Vantage Service Gateway
DESCRIPTION
exceed 50.
This log is sent every time the
VSG reboots successfully.
A log with system and
currently logged-in user
information is sent every time
interval specified.
Default time interval is 60
minutes.
This log records the access
information of a system
account (administrator or
account manager).
This log is sent when all
public WAN IP address(es) is
used for VPN NAT.
DESCRIPTION
4-9