Table of Contents
Advertisement
To activate the keep warm function
•
Touch the desired zone's indicator (7). Then touch the keep warm
sensor (3) either once, twice or three times.
•
Touching the keep warm sensor (3) once will activate the 42°C
heating level.
•
Touching the keep warm sensor (3) twice will activate the 70°C
heating level.
•
Touching the keep warm sensor (3) three times will activate the
94°C heating level.
•
The selection will confirm after approximately 10 seconds.
Please note: The cooking zone indicator will display the (
when the 42°C heating level is active, the (
displayed when the 70°C heating level is active and the (
will be displayed when the 94°C heating level is active.
To deactivate the keep warm function
•
Touch the relevant zone's indicator (7) and use the heat setting
slider sensor (5) to change the power level to 0. The selection will
confirm after approximately 10 seconds.
Please note: Any zones that are still hot to the touch will display an
" " or " " provided the mains power supply is not interrupted.
Bridge function
The hob is equipped with a bridge function which allows you to use
two heating zones with just one zone's controls. This function is
) symbol
) symbol will be
) symbol
17
Advertisement
Table of Contents
