Table of Contents
Advertisement
•
Should the mains cable be damaged
or need to be replaced, it should
only be done so by a qualified
electrician or engineer. The
connections to the hob are shown
below;
•
Ensure that the brass links are
securely fitted. Failure to do so may
prevent the hob from operating
correctly and cause damage.
Appliance electrical rating: 7400W
Understanding the zone markings
•
When you switch the hob on using the on/off sensor, all zone
markings will illuminate. They will remain illuminated until you
select one of the cooking zones or until you switch the appliance
off.
•
When you select a cooking zone, said zone's markings will
illuminate and remain illuminated until you set a power level. The
markings will remain off until you select another zone, when/if you
remove the pan from the active zone or if no pan is detected (this
will last approx. 90 seconds).
•
When you bridge two vertically aligned zones (see pages 17/18)
the zone markings will adjust accordingly to outline the now-
bridged zones (see image on page 20).
30
L1
N
= Brass/Copper bridge link
Fig. 10
(PE)
Advertisement
Table of Contents
