Bridge Function - CDA HN6731FR Installation, Use And Maintenance Manual

Bridge Function

The hob is equipped with a bridge function which allows you to use
two heating zones with just one zone's controls. This function is
intended for use with pans such as fish kettles and is available for the
two zones on the left side.
To bridge the left-hand zones
Touch the cooking zone indicator (5) of the front-left zone and, at the
same time, touch the cooking zone indicator (5) of the rear-left zone.
If the bridge function has been enabled succesfully, the cooking zone
indicator (5) of the rear-left zone will display a ( ) symbol. The front
left zone controls will now alter both zones' heat setting.
To cancel the bridge
Simply touch the same two indicators that were used to activate the
bridge function. If the bridge has been successfully cancelled then the
two zone indicators that were bridged will each display a 0. The zones
will now be individually operational.
Please note: Pans placed on bridged zones must always cover the
vertical markings (II) on the zones;
16