Table of Contents
Advertisement
Using your hob
To switch the hob on
•
To switch the power on, touch and hold the "On/off sensor" (1)
approximately one second. The hob will beep and all four cooking
zone indicators, and both timer indicators, will show "0".
Please note: If a power level is not set within ten seconds, the hob will
switch off automatically.
To activate a zone and set a power level
•
Simply touch the desired zone's indicator (7) and then set the desired
power level using the heat setting slider sensor (5). The standard
power levels range from 1 (minimum) to 9 (maximum). The hob will
then begin heating providing that the correct cookware is being used.
Please note: A cooking zone indicator will pulsate when zone control/
adjustment is available and will continue to pulsate for approximately 10
seconds after a power level has been set.
To deactivate a zone
•
Ensure the hob is unlocked. Press and hold the active zone's
indicator for approximately 3 seconds to return the heat setting to 0.
The cooking zone indicator will display a "0" to confirm that the zone
is now inactive. Alternatively, you can use the slider.
•
If switching off multiple zones, the above steps need to be taken
for each zone. When all the zones are at "0", the hob will switch off
automatically after approximately ten seconds.
•
Alternatively, to switch off the hob immediately, touch and hold the
"On/off sensor" (1) for approximately one second.
for
9
Advertisement
Table of Contents
