Booster Function - CDA Matrix MHN101FR User Manual

To turn the power off to a zone
• To switch off a zone, touch the cooking zone selector (9) so that
the cooking zone indicator (7) pulsates. Then press and hold the
cooking zone selector (9) for approximately three seconds. The
cooking zone indicator will display a "0" to confirm that the zone is
now inactive but will display an " " or " " if the zone is still hot to the
touch.
• If switching off multiple zones, the above step needs to be taken
for each zone. When all the zones are at "0", the hob will switch off
automatically after approximately ten seconds.
• Alternatively, to switch off the hob immediately, touch and hold the
"On/off sensor" (5)
that are still hot to the touch will display an " " or " ".

Booster function

• The hob is equipped with a booster function on all zones, allowing
a higher power level than the maximum for approximately ten
minutes. To turn on the booster function, touch the cooking zone
selector (9) for the desired zone, set the heat setting to "9" using the
"+" sensor (6) and then touch the "+" sensor (6) once more. "P" will
show in the cooking zone indicator to show that the booster is on.
• The booster function automatically deactivates after 10 minutes of
usage. The cooking zone will continue to operate at its nominal
power at this point. The booster can be reactivated after this time
provided the hob's internal components have not overheated.
• To cancel the booster at any time, select the cooking zone using
the cooking zone selector (9) and lower the heat setting using the
"-" sensor (8).
for approximately two seconds. Any zones
9