Table of Contents
Advertisement
Auto-heat function
Every zone is equipped with an auto-heat function, which reduces the
warming up time for the zone.
To activate the auto-heat function on a zone
•
Simply touch the desired zone's indicator (7) and then set the
desired power level using the heat setting slider sensor (5).
•
Touch the relevant zone's indicator once more. The display will
alternate between the set power level and "A" for a preset period
of time, before reducing the power to the originally selected heat
setting. The duration of each auto-heat setting's limiter is shown in
the table below.
To deactivate the auto-heat function
•
Simply touch the desired zone's indicator (7) and then either set
the desired power level using the heat setting slider sensor (5) to
"0" or, alternatively, touch the zone's indicator again to deactivate
the auto-heat function and return the zone to the originally set
power level. Alternatively, press and hold the zone's indicator for
approximately 3 seconds to deactivate the zone.
Zone Heat Setting
Maximum
Operating Time
(seconds)
Please note: The auto-heat function is not compatible with heat
settings 9 or P (Boost).
12
3
1
2
4
5
50
70
135 210 260 430 120
8
9
6
7
P
190
- -
- -
Advertisement
Table of Contents
