Bridge Function - CDA HN9611FR Installation, Use And Maintenance Manual

Bridge Function

The hob is equipped with a bridge function which allows you to use
two heating zones with just one zone's controls. This function is
intended for use with pans such as fish kettles and is available for the
two zones on the left side and the two zones on the right side.
To bridge the left-hand zones
Touch the "+" sensor of the front-left zone and, at the same time,
touch the "-" sensor of the rear-left zone. If the bridge function has
been enabled succesfully, the cooking zone indicator (4) of the rear-
left zone will display a ( ) symbol. The front left zone controls will now
alter both zones' heat setting.
To bridge the right-hand zones
Touch the "+" sensor of the rear-right zone and, at the same time,
touch the "-" sensor of the front-right zone. If the bridge function has
been enabled succesfully, the cooking zone indicator (4) of the rear-
right zone will display a ( ) symbol. The front right zone controls will
now alter both zones' heat setting.
To cancel a bridge
Simply touch the same two sensors that were used to activate the
bridge function. If the bridge has been successfully cancelled then the
two zone indicators that were bridged will each display a 0. The zones
will now be individually operational.
Please note: Pans placed on bridged zones must always cover the
vertical markings (II) on the zones.
17