Table of Contents
Advertisement
Please note: The keep warm setting indicators will display the (
symbol when the 42°C heating level is active, the (
displayed when the 70°C heating level is active and the (
will be displayed when the 94°C heating level is active. The cooking
zone indicator will display a
To deactivate the keep warm function
•
Touch the relevant zone's keep warm function sensor (13) the
required number of times until the display reads '0' again.
Please note: Any zones that are still hot to the touch will display an
' ' provided the mains power supply is not interrupted.
Bridge Function
The hob is equipped with a bridge function which allows you to use
two heating zones with just one zone's controls. This function is
intended for use with pans such as fish kettles and is available for all
zones. However, only vertically aligned zones can be bridged.
To bridge zones
Touch both heat setting slider sensors (12) of the zones that you want
to bridge. A successful zone bridge will be signified by the bridge
function indicator (4) of both zones illuminating. Only one cooking
zone indicator (2) will be lit however, and it is this zone's controls that
should be used to control the bridge.
16
.
)
) symbol will be
) symbol
Advertisement
Table of Contents
