Table of Contents
Advertisement
•
After approximately 10 seconds the selection will confirm and the
time will begin counting down.
•
The timed zone LEDs are oriented in a similar way to the zones;
•
If no time is set within ten seconds, the timer indicators (10) will
become inactive and the zone will continue cooking.
Please note: the timer duration can be adjusted at any time during the
countdown. Simply follow the steps for setting the timer and amend
the minutes as necessary.
To cancel the timer
•
Touch the relevant cooking zone indicator (7) so that the display
pulsates. Then touch the timer indicators so that the second 0
pulsates. Use the heat setting slider sensor (5) to change the
individual minutes to 0. Touch the timer indicators again so that the
first 0 pulsates and use the heat setting slider sensor (5) to set the
tens of minutes to 0. The selection will confirm after approximately
10 seconds.
•
Do this for each zone if necessary.
•
Cancelling the timer will not switch off a zone. You should switch
the zone off manually if required.
14
Advertisement
Table of Contents
